Facts & Figures Completion date: July 2015 Location: Milton Keynes Size of floor: 1800 sq m. Colour: Dusty Grey RAL 7037. Existing floors: A concrete floor which had received several coats of floor paint. Steel service covers had also been painted and needed to be prepared and painted to match the floor. A 1800 sq […]
Read More… from Industrial Floor Coating for Cerulean Milton Keynes
Facts & Figures Completion date: July 2015 Location: Hertfordshire Size of floor: 460 sq m. Colour: Slate Grey Existing floors: A rough tamped / ridged concrete floor The 460 sq m floor was installed in a single phase of six days with a weekend in the middle to allow the screed to dry. The concrete […]
Read More… from Industrial Flooring System for a private Motor Racing Garage
Facts & Figures Completion date: June 2015 Location: Swanley, Kent Size of floor: 950 sq m. Colour: Slate Grey for process areas and Dusty Blue for walkways. Existing floors: A concrete floor which had received a coat of floor paint. A 950 sq m concrete floor which had received a coat of floor paint. There […]
Read More… from Phased Industrial Flooring installation for TC Fluid Swanley
Facts & Figures Completion date: March 2015 Location: Upton Upon Severn, Worcestershire Size of floor: ~85 sq m. Colour: Dusty Blue Floor thickness of approximately 750 microns applied by scratch trowel and roller. Existing floors: Half of the concrete was in a good condition, half had a weak surface with laitance. Approximately 85 square metres. […]
Read More… from Industrial Floor Coating for D Mac Worcestershire
Facts & Figures Completion date: February 2015 Location: Crewkerne, Somerset Size of floor: 1,460 sq m. Colour: Slate Grey Existing floors: One half of the building has a floating sand cement slab. The other half was comprised of numerous slabs of varying quality most of which had been coated. Numerous repairs included joints and cracks […]
Read More… from Industrial Floor Coating at Creasefield Crewkerne Somerset
Facts & Figures Completion date: December 2014 Location: East Grinstead, East Sussex Size of floor: 550 sq m. Colour: Light Grey Existing floors: A failed resin floor which had laminated and lifted. 550 sq m of a failed resin floor which had laminated and lifted. Following investigations and the success of our Trial Patch Condale […]
Read More… from Industrial Flooring at Condale Plastics East Grinstead
Facts & Figures Completion date: December 2014 Location: Tilbury, Essex Size of floor: 126 sq m. Colour: Dusty Grey Ral 7037 Existing floors: Heavily tamped open textured concrete with layers of solvent based paint. Following successful installations in 2006 and 2012, Hyundai chose Elgood Flooring to install our 2mm smoothing solvent free Epoxy floor. To […]
Read More… from Industrial Floor Coating for Hyundai Tilbury Docks
Facts & Figures Completion date: November 2014 Location: Oxfordshire Size of floor: 460 sq m. Colour: Slate Grey Existing floors: An old and damaged resin floor. 460 sq m old and damaged resin floor. The installation was completed in four days. Having assessed our coating in at SSTT next door, Polar chose our Britdura 750 […]
Read More… from Industrial Flooring Refurbishment for Polar Technology Oxfordshire
Facts & Figures Completion date: October 2014 Location: High Wycombe Size of floor: 2,000 sq m. Colour: Slate Grey Finish: Built in fine slip resistant finish ideal for use with scrubber dryer machines. Total thickness: Floor thickness of approximately 750 microns applied by scratch trowel and roller to achieve an even distribution of the coating […]
Read More… from Industrial Floor Coating for Martin Audio High Wycombe
Facts & Figures Completion date: August Bank Holiday 2014 Location: Cheshire Size of floor: 1,200 sq m. Colour: Slate Grey throughout with Charcoal on the run-ups to the Roller Shutter Doors. Existing Floors: Worn and painted concrete floors. 1,200 sq m of worn and painted concrete floors. The installation was completed in three days over […]
Read More… from Industrial Floorings for Novar ED&S / Honeywell Merseyside
