Approximately 200sq m prepared and installed over an extended weekend. Elgood manufactured, prepared and installed entirely by Elgood Industrial Flooring. Having relocated and replaced plant, the floor was littered with footprints. The last 10 years meant that there was also general wear and tear to our existing Britdura 2000 solvent free Epoxy Floor. Lesjofors Beckenham […]
After much research and site visits to The Hospital Club Studio in Covent Garden, the Film Department at CSM chose a matt black floor finish which has been adopted by a few smaller studios where use is light. We removed the old lino floor and prepared the surface using vacuum contained diamond grinding. CSM chose […]
Previously owned by Diageo, Versa acquired the warehouse in Acton, London in 2021 and have converted the building into a 920 sq m television studio to add to their portfolio of studios. The floor was prepared using vacuum contained shot-blasting and diamond grinding to clean the concrete and remove residual latex compounds. We completed the […]
Having successfully installed 4 studio floors for IMG in 2013 we were selected at short notice by IMG Media to install the floor which was to be used by their client The Discovery Channel. Discovery chose the Elgood Universal Television Studio Floor, designed, manufactured and installed entirely by Elgood Flooring. The existing floor was a […]
Previously an industrial maintenance space, the area has been converted for training of engineers. Our industrial floor coatings and screeds have been used successfully on site for many years. The floor was completed in two days in our Slate Grey colour. The industrial self smoothing Epoxy resin is applied by trowel and has a fine […]
The 280 square metre extension to the Beckenham, London manufacturing facility required a new hard wearing industrial floor finish. Over 15 years ago, Elgood Industrial Flooring installed gangways in the main factory and refurbished the floor in the Press Room in 2011. Our solvent free Epoxy Industrial Flooring has performed well and retains a good […]
Riverside Studios have new facilities at their historic Television and Theatrical base in Hammersmith, London. We were selected by Riverside TV to install our Universal Studio Floor in their exciting studio complex. The concrete floor was prepared using vacuum contained shot-blasting to clean and key the surface. The Elgood Universal Television Studio Floor with a […]
Riverside Studios have new facilities at their historic Television and Theatrical base in Hammersmith, London. […]
Riverside Studios have new facilities at their historic Television and Theatrical base in Hammersmith, London. We were selected by Riverside TV to install our Universal Studio Floor in their exciting studio complex. Studio 1 was the first studio at Riverside to receive our Universal Studio Floor which has an average thickness of 35mm. Studio 1 […]
Completed in October 2019, the 500 sq m facility was acquired to house Point CNC’s growing number of CNC machines. The concrete floor required a thorough preparation to remove adhesive from one area area and paint from another. This was done using a combination of vacuum contained industrial shot-blasting and diamond grinding. Where a wall […]
