Home » Case Studies » South Wales Fire and Rescue. Aberbargoed, South Wales

South Wales Fire and Rescue. Aberbargoed, South Wales

500 square metres completed in a single phase of three days.

The concrete was prepared and the coating installed entirely by Elgood Industrial Flooring.

SWFR Required a hard wearing coating that would be easy to clean and maintain. The floor required a finish that would be both easy to squeegee water off of but would also offer some purchase when wet.

The floor was to be used as appliance bays

No divided responsibility makes  our Workmanship and Materials Warranty meaningful.

Installation Programme: A single phase of three days.

The Elgood Service: The Elgood Service: Manufactured, prepared and installed entirely by Elgood Industrial Flooring.

Facts & Figures
  • Completion date: January 2014
  • Location: Aberbargoed, South Wales
  • Size of floor: 500 square metres.
  • Colour: Pebble Grey. Ral 7032.
Needs
A hard wearing coating that would be easy to clean and maintain. The floor required a finish that would be both easy to squeegee water off of but would also offer some purchase when wet.
Preparation
Vacuum contained dust free shot-blasting and diamond grinding.
Floor
  • The Britdura 750 Solvent Free Epoxy Floor Coating.
  • Floor thickness of approximately 1mm.
  • An expansion joint was installed.
  • Use of Floor: Appliance Bays
  • Main Contractor: Knox and Wells, Elgood Industrial Flooring were specified by SWFR and worked with Knox and Wells on their behalf.
  • Finish: Built in fine slip resistant finish to not inhibit cleaning.
Find out more about our professional floors – or get a quick quote today
Get Started