EPOXY COATING
Solvent Free Epoxy Floor Coatings and Primer CoatsWe are revising our product range in an effort to eliminate VOC containing products from our range of products. Elgood Industrial Flooring now have an easy to use Epoxy Floor Coating designed for clients who wish to improve the appearance of their factory floors, but cannot predict when improvements could be carried out by an outside contractor. We provide on site tuition through one of our experienced floor layers should you feel it necessary. Needless to say, all the Epoxy coatings are equipped with clear instructions and technical assistance is only a telephone call away.The DIY Epoxy coatings are available in a range of colours so you can be as elaborate with your floor layout as you wish. The Epoxy coatings are normally delivered within 48 hours of your order being placed. You have the assurance of dealing direct with the manufacturer. For further information, please refer to the MSDS PDF file: Epoxy CoatingsAvailability: 4.5kg, 3.5kg and 1.3 kg unit for repairs and line marking.
Epoxy Floor CleanerAn alkaline detergent for the removal of tyre marks and general soiling. The detergent can be used for general washing and for heavy duty scrubbing. The detergent is designed for use with scrubber dryer machines fitted with pads or brushes. Always consult the scrubber dryer's manufacturer's guide for suitable pads and brushes to meet your particular requirements. This product is Nonylphenol free. Slip Resistant Additives
* Industry Standard Finish |
Click Images to View Enlargements
;)
|
Application Tools
The following accessories are available:
| Unit Size | Application Tools | Price |
| 12 inch | Frame and roller | £9.50 |
| 12 inch | Replacement roller | £3.95 |
| 12 inch | Paint tray | £10.00 |
| Mixing paddle | £9.00 | |
| Small mixing paddle (for epoxy line marking) | £8.00 |
Floor Colours
Colours represented below are as close as conventional matching techniques permit, but limitations and personal screen settings mean that they are not exact. We would highly recommend that you request a sample before making any final colour selection.
 |
 |
 |
 |
 |
| Cherry Red 01 | Light Grey 10 | Sky Blue 15 | Terracotta 02 | Dusty Blue 06 |
 |
 |
 |
 |
|
| Opaline 21 | Slate Grey 13 | French Blue 05 | Grass Green 08 |
Line Marking Colours
Colours represented below are as close as conventional matching techniques permit, but limitations and personal screen settings mean that they are not exact. We would highly recommend that you request a sample before making any final colour selection.
 |
 |
 |
 |
 |
| White Line | Yellow Line | Red Line | Green Line | Blue Line |
Epoxy Coating - Instructions
PREPARATION
- The floor should be clean and sound. Contamination such as dirt, dust, oil etc must be removed before coating the floor.
- Epoxy coatings adhere best to a lightly textured surface, this is best achieved by shotblasting the floor. Shotblasting need not create dust and is a cost effective method of preparation. We can arrange this service for you. The heavier the traffic, the more important it is to shotblast the floor.
- If you do not shotblast the floor always paint a trial area to prove your preparation is adequate and that the epoxy coating is well adhered to the concrete.
MIXING
- Always mix complete units. The ratio of resin to hardener is critical. Mix with an electric drill fitted with a mixing paddle.
- Mix one unit at a time as the 'pot life' of the mixture is only 15 minutes. Mix thoroughly, use immediately.
SLIP RESISTANT
- Whilst drill mixing add one to two cups of Elgood Grit 70 to produce a lightly textured surface.
PAINTING
- Pour the mix into a paint tray and apply using a long-handled roller.
- Two coat applications are best. The second coat should be applied 12 to 24 hours after the first coat.
- The floor should be ready for light traffic in 12 to 24 hours and normal traffic in 24 to 36 hours.
PERSONAL PROTECTIVE EQUIPMENT
- Overalls, cotton and / or PVC gloves should be worn.
- Breathing masks can be worn when using the paint.
- Good ventialtion is important when applying any of the products.
Terms and Conditions of Sale
- V.A.T.
All prices quoted are exclusive of value added tax. - Payment
Elgood Industrial Flooring shall invoice immediately after the products have been delivered. Payment shall be due within thirty days of the date of invoice. - Slip Resistance
Floorings are described as slip resistant when installed in clean, dry and uncontaminated conditions. The Employer/Client shall be responsible for ensuring that the flooring works provide a safe working surface in the prevailing working conditions immediately after completion of the flooring works and thereafter. It should be noted that the slip resistance of all surfaces will be reduced as the surface becomes contaminated or worn. - Colours
The initial colour and gloss of the flooring works will fade with normal industrial use. - Coverage Rates
The coverage rates provided by Elgood Industrial Flooring are given as a guide only. In practice, the texture and porosity of the concrete will produce varying rates of coverage. - Recommended Site Conditions
The building in which the works are to be carried out shall be fully enclosed and maintained (24 hours a day) at a temperature of not less that 10°C during the installation. - Structural Defects
E.I.F. shall not be held liable for any defect in the application of DIY flooring products which is due to structural, physical or chemical inadequacy in the building/s in which the products are laid.
Track your order online
